The installation of solar photovoltaic brackets, solar energy has been developed rapidly under the strong support of national policies, and a considerable part of solar photovoltaic brackets are installed on the roof of buildings. At this time, the connection between the photovoltaic support and the building has become the focus of the design. On the premise of not violating the current national regulations, firstly satisfy the premise of operation and maintenance and process safety production, while taking into account the needs of other related industries, and choose the appropriate connection method for photovoltaic supports with different conditions.
Let me explain to you the installation method of the solar bracket
(1) Bracket installation: put the anchor bolt holes of the front and rear columns on the anchor bolts on the concrete foundation that has been constructed; check whether the front and rear columns are correct; adjust the length direction centerline of the front and rear columns and the centerline of the pillars For coincidence, use a horizontal pipe or level to measure and adjust the level of the front and rear columns, and use a plumb ball to adjust the verticality of the columns. If there is deviation in the elevation of the pile foundation surface, use spacers to level the front and rear columns and then tighten the anchor bolts. The pads must be welded to the front and rear column bases. Check the diagonal error and the flatness of the bottom of the bracket. And adjust the front and rear beams to ensure that the error is within the specified range, and tighten the bolts with a wrench.
(2) Beam installation: Determine the position of the beam according to the design requirements and the length of the end. The beam is bolted to ensure a horizontal and vertical horizontal and reliable connection. In order to ensure the squareness of the fixed battery plate on the beam, the beam should be squared in advance, and the diagonal adjustment measurement should be carried out to ensure that the diagonal deviation is within the allowable range.