Product Name:Aluminum Solar Carport System
Main Material: AL6005-T5 Aluminum Alloy
Installation Location:Outdoor Parking Areas
Service Life:Over 25 Years
Carport Mounting
We supply solar carport mounting systems for parking areas and commercial PV projects, including an aluminum AL6005-T5 solar carport racking product. The right structure depends on parking-bay dimensions, vehicle clearance, column position, spans, foundations, PV module layout and site wind and snow conditions. Unlike rooftop brackets, carport structures must also provide vehicle clearance and support a parking canopy. For bulk orders and project supply, confirm the structural design, module connections, drainage requirements and installation documentation before selecting a configuration. Send your site layout and destination so we can review the mounting requirements.
-
![Aluminum Solar Carport System]()
-
![Solar Carport Racking]()
Solar Carport RackingProduct name: Solar carport mounting systemread more
Application: Parking Lot /Mall/home
Material: AL6005-T5 -
![Solar Carport Mounting]()
Solar Carport MountingDiscover the transformative potential of our Solar Carport Mounting system. Seamlessly integrating solar panels into your carport, this innovative solution not only provides shelter for your...read more
Parking Canopy Design
Start with the Parking Layout and Column Positions
A solar carport is both a PV mounting structure and a parking canopy. Vehicle clearance, pedestrian routes, drainage and foundation placement must work together with the module layout.
PARKING GEOMETRY
Bay Width and Vehicle Clearance
Provide bay dimensions, aisle width, minimum clear height and required access for cars, vans or service vehicles. Check whether columns or braces interfere with doors, turning movements or accessible spaces.
STRUCTURAL LAYOUT
Post Location and Span
Post count, position, roof projection and clear span affect beam sizes, foundations and available parking space. Cantilever or two-sided arrangements require separate engineering review.
WATER MANAGEMENT
Roof Slope and Drainage
Confirm roof pitch, runoff direction, gutter requirements and discharge points. Water should not be directed into vehicle access routes, electrical equipment or areas where local drainage rules prohibit it.
Technical Selection
Solar Carport Mounting Specifications to Confirm
Member sizes, structural loads and connection details depend on the site conditions and approved carport layout.
| Design Item | Information Required | Effect on the Mounting System |
|---|---|---|
| Parking & clearance | Bay dimensions (m), aisle width, clear height and vehicle access | Determines canopy coverage, post positions and potential obstructions. |
| Structural span | Post spacing (m), roof projection and preferred support layout | Changes beam, post, connection and foundation design. |
| PV module layout | Module L × W × thickness (mm), weight (kg), orientation and array count | Determines rail spacing, module clamps, support points and roof coverage. |
| Material & coating | Selected aluminum or steel grade, surface protection and corrosion environment | Changes component specifications and corrosion protection. The Solar Carport Racking model specifies AL6005-T5 aluminum. |
| Wind & snow | Site location, applicable design code and project-specific design loads | Controls structural calculations, anchorage, deflection and connection design. |
| Foundation | Soil/geotechnical report, surface conditions and foundation restrictions | Determines whether concrete footings or other anchorage arrangements are feasible. |
| Drainage | Roof pitch, rainwater routing and gutter/downpipe requirements | Affects canopy details and protection of parking and electrical areas. |
| Cable routing | PV string plan, electrical equipment locations and cable pathways | Influences penetrations, cable protection and service access. |
| Project documents | Drawings, BOM, required calculations, inspection or coating documentation | Defines the technical review and approval package for the order. |
Layout Choices
Compare Carport Configurations Against Site Constraints
Single-row, double-row and cantilever arrangements are design options to assess, not interchangeable standard products. Feasibility depends on structural calculations and the available foundations.
SINGLE ROW
One Parking Row
Useful to assess along property edges or narrow parking areas. Confirm post placement, covered depth, drainage edge and the approach angle of vehicles.
DOUBLE ROW
Back-to-Back Parking
Can be considered for wider parking layouts with a shared support line. Check overall span, column interference, gutters and routes through the car park.
CANTILEVER
Reduced Front-Column Obstruction
May improve maneuvering space but places different demands on posts, foundations and deflection control. Confirm structural feasibility before selecting this layout.
Project Applications
Solar Carport Applications
Commercial Parking
For retail sites, office properties and shopping centers where vehicle circulation, customer access, canopy coverage and local drainage need to be coordinated.
Industrial Facilities
For staff parking or light-commercial fleet areas where larger site plans, maintenance access and structural loading may govern the design.
EV Charging Parking Areas
For projects integrating PV with charging equipment. The canopy, charger, electrical distribution and cable routing require coordinated design; a mounting structure alone is not a charging system.
Our Carport Product
Solar Carport Racking in AL6005-T5
Our Solar Carport Racking uses an AL6005-T5 aluminum structure for parking-area applications. To confirm suitability, send your project location, bay layout, module dimensions, required clearance, wind/snow criteria and site drawings. Structural loading and project documentation must correspond to the approved configuration.
- Module mounting details and frame compatibility
- Post positions, support layout and foundations
- Materials, surface finish and coastal exposure
- Component list, packaging and project drawings
Order Preparation
From Site Drawings to a Mounting BOM
Confirm the site plan and module details before approving the mounting BOM.
01
Send the Site Plan
Share the parking plan, vehicle clearances and local design requirements.
02
Confirm PV Modules
Provide the PV module model, dimensions and mounting orientation.
03
Review Engineering
Confirm the supports, design loads, foundations and drainage.
04
Finalize the Order
Approve the BOM, packaging, required documents and delivery plan.
Related Products
Related Solar Products
Solar Carport Mounting
Compare carport mounting options, structural arrangements and installation details.
View Carport Product →Solar Panels
Choose PV module dimensions, weight and frame details before approving the racking layout.
Browse Solar Panels →Solar Project References
View our rooftop and utility-scale solar PV project examples.
View Solar Projects →Buyer Questions
Solar Carport Mounting FAQ
What information is needed to choose a solar carport layout?
+
Send the parking plan, bay dimensions, aisle width, required vehicle clearance, preferred column locations and project site. These inputs determine which layouts are worth engineering review.
What material is used for your solar carport racking?
+
Our Solar Carport Racking product specifies AL6005-T5 aluminum. The full material schedule, fasteners and surface protection should be checked against the selected drawings and site conditions.
Can I use the same wind and snow load ratings for every project?
+
No. Structural design depends on local wind, snow, terrain, geometry, supports, foundations and the applicable code. Load figures for one configuration should not be assumed to cover another site.
Will the mounting structure fit our specified solar panels?
+
Compatibility depends on the module's dimensions, frame thickness, weight, clamp zones and mounting orientation. Send the module datasheet so the rail and clamp arrangement can be reviewed.
Are foundations included with the carport structure?
+
Foundation supply and engineering scope must be confirmed for each project. A local geotechnical assessment and structural design may be needed before footing or anchor details can be finalized.
Can a solar carport be combined with EV charging?
+
Yes, the canopy can form part of a PV and EV charging project. Charger selection, grid connection, protection, cable routing and electrical distribution are separate design requirements.
What should we provide for bulk pricing and shipping arrangements?
+
Please provide the project layout, module details, total parking spaces or canopy area, destination, required documents and target schedule. We can then discuss the BOM, packaging, order quantity and quotation basis.
Project Inquiry
Request a Solar Carport Mounting Quote
Send your preliminary site and PV plans so we can review the racking and procurement requirements.
- Project country, location and intended application
- Parking-bay plan, quantity and overall canopy area
- Vehicle clear height, span and post restrictions
- PV module size, weight and array layout
- Wind/snow design basis and foundation information
- Drainage, corrosion and EV charging requirements
- Required drawings, certification or tender documents
- Packaging, destination and target delivery schedule
Send Your Carport Project Details
Please include the parking layout, required clearance, PV module model, project location, expected quantity, local design requirements and any drawings or tender documents.
Xiamen D.T. Multi Tech Co., Ltd. is one of the most professional carport solar mounting system manufacturers and suppliers in China, we're featured by quality products and good service. Please rest assured to wholesale cheap carport solar mounting system from our factory.
Ground Mounted Solar Pv, Solar Mounting, Ground Mount Solar Racking Systems