639082239009
deven@deven-tina.com
enLanguage

Commercial Solar Battery Storage

We supply commercial and industrial battery energy storage equipment for EPC contractors, system integrators and project buyers. Options include air-cooled cabinets, liquid-cooled battery cabinets, integrated solar-plus-storage units and containerized BESS for larger installations.

Compare energy capacity (kWh/MWh), charge and discharge power (kW/MW), battery voltage, PCS and EMS interfaces, cooling, fire protection and grid requirements. Share your load profile and operating goals for a model recommendation and quotation.

Request s BESS Quote→
100/120 kWh Cabinets 241 kWh Integrated ESS 418 kWh Battery Cabinet 5 MWh Container BESS
First 1234 Last

Commercial BESS Configurations and Applications

Air-Cooled Battery Cabinets

Compact commercial installations with defined energy and power requirements. Check cabinet ventilation, AC rating, battery voltage and integrated equipment before selecting a configuration.

Liquid-Cooled Battery Cabinets

Higher-energy cabinet options for industrial loads and PV storage. Confirm whether PCS is included or must be specified separately, plus coolant maintenance and site clearances.

Containerized Energy Storage

MWh-scale battery systems for large industrial sites, renewable integration and grid projects. Transformer, PCS, protection and grid connection are defined by project scope.

Peak Shaving, Solar Storage and Backup

Peak shaving depends on demand peaks and tariff rules; solar self-consumption follows PV and load profiles; backup requires suitable PCS, switching and critical-load design.

Key Specifications for Commercial Energy Storage

Specification Buyer Check Why It Matters
Energy Capacity Nominal and usable kWh/MWh; operating SoC and DoD limits Determines discharge duration at a given load.
Power Rating Continuous PCS/inverter kW or MW, peak power and AC voltage Sets simultaneous discharge and grid-interface limits.
Battery DC System Voltage range, cell/pack arrangement and current limits Must match the selected PCS and electrical protection.
BMS / EMS / PCS Communications, control functions and approved interoperability Supports coordinated dispatch, monitoring and protection.
Thermal and Fire Protection Cooling method, detection, suppression and site fire strategy Affects spacing, maintenance and local approvals.
Outdoor Installation IP rating, ambient limits, corrosion exposure, size and weight Determines foundation, clearance and site suitability.
Compliance and Logistics Model-specific tests, transport documents, packaging and destination rules Supports procurement approval and shipment planning.

How to Specify a C&I Battery Storage Project

01

Define the Use Case

Choose peak shaving, time-of-use shifting, solar self-consumption, backup or microgrid operation.

02

Measure Power and Energy

Share interval load data, maximum demand, required discharge hours and available PV generation.

03

Check Site Interfaces

Confirm grid voltage, transformer, PCS, EMS, fire requirements and physical installation constraints.

04

Define the Supply Package

Specify battery-only or integrated ESS, destination market, quantity and required documents.

Battery, PCS and Site Integration

Match the battery DC voltage, current limits and BMS protocol to the PCS.
Check EMS dispatch functions, metering, plant controls and communication interfaces.
Confirm AC voltage, transformer requirements, protection and utility interconnection.
Review PV, diesel generator and backup switching interfaces when required.
Verify ventilation or liquid-cooling service space and enclosure access.
Plan site-specific fire protection, emergency isolation and local permitting.
Battery capacity in kWh is not the same as AC output power in kW. A battery-only cabinet does not provide independent AC output unless it is paired with a suitable PCS and system controls.

Commercial Battery Storage Product Options

Product Key Specifications Selection Notes Details
Air-Cooled Commercial Cabinet 100.48 / 120.576 kWh battery options; 320 / 384 V DC Check the selected integrated AC rating and PV input configuration. View Cabinet →
All-in-One Commercial ESS 241 kWh battery; 125 kW rated AC output model Compare integrated AC power, cooling and grid requirements. View ESS →
LiFePO4 Battery Cabinet 418 kWh nominal energy; 1331.2 V rated DC; liquid cooling Confirm external PCS and system integration scope. View Cabinet →
5 MWh Energy Storage Container 5.015 MWh battery configuration; 1331.2 V rated DC Large-scale site design; confirm PCS, transformer and grid interface. View Container →

Documentation and Project Supply

For a C&I storage order, request the current model datasheet, battery and PCS specifications, installation manual, fire-protection information, applicable test and transport documents, and written warranty terms. Confirm certificate holders and covered models for the destination market.

We can discuss equipment-only, cabinet or container supply based on the required configuration. Packaging, branding options, quantities and delivery terms are confirmed against the order.

418 kWh Technical Specifications → 5 MWh System Details → Contact Our Sales Team →

Commercial Battery Energy Storage FAQ

  • How do I size a commercial battery storage system?

    Use interval load data and your operating goal to determine discharge power (kW) and duration (hours). Include usable energy, efficiency, tariff rules and any required reserve capacity.

  • When should I choose a cabinet instead of a containerized BESS?

    Cabinets may suit smaller sites or modular installations. Containerized systems suit larger capacities but require more extensive site, PCS, transformer and grid-connection planning.

  • Does every commercial battery cabinet include a PCS?

    No. Some configurations integrate an inverter or PCS; others provide DC battery storage for connection to separate power conversion equipment. Check the quoted equipment list.

  • Can commercial BESS reduce peak demand charges?

    It may reduce billed peaks where tariff rules allow. Savings depend on the load profile, demand-charge structure, dispatch controls and available storage power and energy.

  • Can a commercial battery keep loads running during a grid outage?

    Only with a system designed for backup or islanded operation, including appropriate PCS, switching, controls and protection. A grid-connected battery alone does not guarantee backup power.

  • Which safety and transport documents should buyers request?

    Request model-specific battery test and transport records, applicable certificates, installation and fire documents, and warranty terms. Required standards differ by equipment and country.

  • What details are needed for a commercial storage quotation?

    Send your application, load data, required kW and kWh, grid voltage, site location, quantity, destination and required certifications. Attach a single-line diagram if available.

Request a Commercial Battery Storage Quote

Send your target power (kW/MW), usable energy (kWh/MWh), application, grid voltage and project location. Add your load profile, system drawings, required documentation and delivery destination for a suitable equipment quotation.

 

Xiamen D.T. Multi Tech Co., Ltd. is one of the most professional commercial solar battery storage manufacturers and suppliers in China, we're featured by quality products and good service. Please rest assured to wholesale cheap commercial solar battery storage from our factory.