Xiamen D.T. Multi Tech Co., Ltd. is one of the most reliable manufacturers and suppliers of solar panel mid clamps in China. With abundant experience, we warmly welcome you to wholesale cheap solar panel mid clamps from our factory. If you have any enquiry about cooperation, please feel free to email us.
PV Module Mounting Hardware
Solar Panel Mid Clamps for Framed PV Modules
Our solar panel mid clamps secure adjacent framed photovoltaic modules to compatible mounting rails. Installed between two panels, the clamp connects the module frames to the supporting rail through a fastening assembly. We offer aluminum mid clamp options in different sizes for rooftop and ground-mounted solar projects.
Aluminum Clamp Material
Aluminum 6005-T5 is included in the listed mid clamp material combination.
Material Combination
AL6005-T5 and SUS304 are listed for the clamp assembly. Bolt and connector details depend on the selected configuration.
Available Size Options
Size options include 30, 32, 35, 38, 40, 45, 46 and 50 mm.
Technical Specifications
Solar Panel Mid Clamp Specifications
Mid clamp specifications and available size options for PV mounting applications.
| Parameter | Product Information | Selection Requirement |
|---|---|---|
| Product type | Solar panel mid clamp | Secures adjacent framed PV modules at an interior joint. |
| Listed materials | AL6005-T5 and SUS304 | Material combination for the selected clamp assembly. |
| Listed size options | 30 / 32 / 35 / 38 / 40 / 45 / 46 / 50 mm | Select the appropriate size using the clamp and module drawings. |
| Surface finish | Depends on selected variant | Specify the required finish with the product enquiry. |
| Installation position | Between adjacent PV modules | Use at the module's approved interior clamping positions. |
| Module frame fit | Clamp model dependent | Match frame depth, edge geometry and permitted clamp zones. |
| Rail compatibility | Rail profile dependent | Match the rail channel, slot opening and connector. |
| Bolt and connector | Selected by assembly | Check bolt thread, length, connector type and engagement. |
| Tightening torque | Per installation instructions | Use the specified torque for the complete assembly. |
| Structural load capacity | Depends on mounting assembly | Evaluate loads with module, rail and fastening configuration. |

Clamp Assembly
How Mid Clamps Connect Solar Panels to Rails
A mid clamp holds two adjacent module frames against a supporting rail. A secure connection requires matching clamp, fastener and rail profiles.
1. Clamp Body
The clamp body contacts both neighboring module frames. Its shape and contact area must suit the approved module clamping positions.
2. Fastening Assembly
The bolt and connector apply clamping force through the assembly. Bolt size and engagement depend on the selected clamp and rail.
3. Mounting Rail
The rail supports the PV modules and receives the clamp connection. Rail channel geometry determines the compatible fastening arrangement.
Mounting Compatibility
Confirm Module Frame and Rail Compatibility
The selected clamp must match the PV module frame, rail channel and fastening arrangement. The complete connection also needs to meet the project's installation requirements.
Module Frame Dimensions
Match the module frame depth, edge shape and approved clamp zones with the selected mid clamp geometry.
Rail Channel and Connector
Rail slot dimensions and channel connectors must suit the selected fastening assembly.
Bolt Size and Torque
Use a bolt length and thread engagement suitable for the assembly. Tighten according to the approved instructions.
Structural and Site Conditions
Assess the complete mounting system for site wind and snow loads, corrosion exposure and material compatibility.
- PV module frame drawing
- Approved module clamping positions
- Mounting rail profile
- Bolt and connector arrangement
- Wind and snow design requirements
- Project environment and material exposure
Project Applications
Solar Mid Clamp Applications
Commercial Rooftop Arrays
Mid clamps secure neighboring framed modules on compatible rooftop rail systems. Their position and fastening arrangement follow the mounting design.
Ground-Mounted Solar Arrays
Rail-based ground structures use compatible mid clamps between modules where the racking and panel specifications permit the connection.
Module Replacement and Expansion
Replacement and expansion projects may require clamps suited to existing rail channels and module frame dimensions.
Engineering and Procurement
Technical Documents and Bulk Mid Clamp Orders
We supply solar panel mid clamp options for mounting-system buyers, installers and EPC teams. Share your required configuration and quantity to discuss drawings, packaging and quotation terms.
Drawings and Installation Details
Product drawings show clamp geometry and connection dimensions. Installation instructions define the applicable fastening method.
Material and Test Documents
Request material and relevant test documents for the selected assembly.
Quantity and Packaging
Specify the required quantity by clamp size and assembly. Packaging can be discussed according to the order scope.
Finish and Order Options
Share any surface finish, dimension or packaging requirements with the enquiry. Options depend on the selected product.
- Selected clamp size and drawing
- Module frame and mounting rail model
- Fastening assembly requirements
- Order quantity and packaging needs
- Destination country and technical documents
- Delivery location and preferred schedule

Related Mounting Components
Mid Clamps, End Clamps and Mounting Rails
Solar Panel End Clamps
End clamps secure modules at the outer edges of a panel row rather than at interior joints.
Solar Panel Mounting Clamps
Compare clamp designs and fastening arrangements for different module positions.
Solar Panel Mounting Kits
Explore rails, clamps, connectors and other components used in PV mounting assemblies.
Buyer Questions
Solar Panel Mid Clamp FAQ
- What is the difference between a solar mid clamp and an end clamp?
A mid clamp secures two adjacent framed solar panels at an interior joint. An end clamp secures the outer edge of the first or last panel in a row.
- What mid clamp sizes are available?
We offer size options listed as 30, 32, 35, 38, 40, 45, 46 and 50 mm. Share your module frame and rail specifications so we can identify the suitable clamp configuration.
- Can these mid clamps fit any aluminum solar mounting rail?
Not automatically. The rail channel, slot geometry, connector type and bolt arrangement must match the selected mid clamp.
- What tightening torque should be used for a solar mid clamp?
Tightening torque depends on the bolt size, clamp body, rail connector and module requirements. Follow the approved installation instructions for the complete assembly.
- Are the mid clamps rated for wind and snow loads?
Wind and snow resistance depend on the complete mounting assembly, including clamps, fasteners, rails, module fixing positions and project conditions.
- What information is needed for a wholesale mid clamp quote?
Please provide the clamp size, module frame and rail specifications, fastening requirements, order quantity, destination country and delivery schedule.
Project Enquiry
Request a Solar Panel Mid Clamp Quote
Share your project requirements to discuss mid clamp options, technical drawings and quotation terms.
Send Your Clamp Specifications →Hot Tags: solar panel mid clamps, mid clamp for solar panel, solar panel mounting mid clamp, PV module mid clamp, aluminum solar mid clamp, solar panel rail clamps, wholesale solar mid clamps, Solar Roof Rails, Solar Mounting Clamps, Triangle Mounting Bracket, End Clamp Solar Panel, Walkway Solar Roof, Solar Bird Guard







